CDNXJ - BUILD-UP LH, DYNAMANG LH, SELF HARDENING, 1027
- MSDS: CDNXJ
- Manufacturer: STOODY CO
- Product Name: BUILD-UP LH, DYNAMANG LH, SELF HARDENING, 1027
- National Stock Number: 3439-00-334-4922
Product Identification
Product ID:BUILD-UP LH, DYNAMANG LH, SELF HARDENING, 1027
MSDS Date:04/16/1992
FSC:3439
NIIN:00-334-4922
MSDS Number: CDNXJ
Responsible Party
US
Emergency Phone: 502-781-9777
Info Phone: 502-781-9777
Cage: 57965
Contractor
Telephone: 502-781-9777
Cage: 57965
Ingredients
MANGANESE (SARA 313)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 0-20%
OSHA PEL C 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9495
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9495
CHROMIUM (SARA 313) (CERCLA)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 1-10%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9495
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
NICKEL (SARA 313) (CERCLA)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 0-1%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9495
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 0-1.6%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM
IRON
CAS: 7439-89-6
RTECS: NO4565500
Fraction By Weight: 45-90%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9495
CALCIUM FLUORIDE; (FLUORIDE)
CAS: 7789-75-5
RTECS: EW1760000
Fraction By Weight: 0-5%
OSHA PEL 2.5 (MFR)
ACGIH TLV: 2.5 AS F (MFR)
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 0-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9495
GRAPHITE
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: 0-3%
OSHA PEL 15 MPPCF; Z-3
ACGIH TLV: 2 MG/M3 RDUST; 9495
PULM FUNCTION. LONG TERM OVEREXP TO
RTECS: 9999999ZZ
& TREMORS SIMILAR TO PARKINSON'S DISEASE. BEHAVIORAL
RTECS: 9999999ZZ
EMPLOYEES EXPOSED TO MANGANESE CMPDS SHOULD GET
RTECS: 9999999ZZ
MANGANISM. STUDIES HAVE SHOWN THAT PRODUCTION
RTECS: 9999999ZZ
INCIDENCE OF LUNG CANCER. CHROMATES MAY CAUSE AN
RTECS: 9999999ZZ
& ALLERGIC SKIN RASH HAVE BEEN RPTD. CHROMIUM VI
RTECS: 9999999ZZ
OVEREXP TO NICKEL CMPDS MAY CAUSE
RTECS: 9999999ZZ
A HIGHER INCIDENCE OF LUNG & NASAL CANCER. RPTD
RTECS: 9999999ZZ
& EXCESS CALCIFICATION OF BONES & LIGAMENTS OF RIBS,
RTECS: 9999999ZZ
SKIN RASH. SHIELDING GASES SUCH AS ARGON, HELIUM &
RTECS: 9999999ZZ
CAN INJURE EYES & BURN SKIN. HEAT RAYS
RTECS: 9999999ZZ
ELEC SHOCK CAN KILL. NOISE CAN DAMAGE HEARING. FOR
RTECS: 9999999ZZ
SECONDARILY COMPLEX OXIDES OF CHROMIUM,
RTECS: 9999999ZZ
POTASSIUM. GASEOUS REACTION PRODUCTS MAY INCLUDE
RTECS: 9999999ZZ
OXIDES MAY BE FORMED BY THE RADIATION FROM THE ARC.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING/OXY FUEL WELDING
MAY CREATE ONE/MORE OF THE FOLLOWING HLTH HAZ: FUMES & GASES-CAN BE
DANGEROUS TO YOUR HLTH. COMMON ENTRY IS BY INHAL. ACUTE:OVEREXP TO
WELDING FUMES MAY RSLT IN D ISCOMFORT SUCH AS DIZZ,
NAUS/DRYNESS/IRRIT OF NOSE, THROAT/EYES. CHROMATES PRESENT IN THE
FUME CAN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONO ON EVAL OF CARCIN RISK
OF CHEM TO MAN, VOL 49, PG 257, 1990:GROUP 2B. NTP 7TH ANNUAL RPT
ON (SUPDAT)
Effects of Overexposure:HLTH HAZ:CAUSE IRRIT OF THE RESP SYS, DMG TO
LUNGS & ASTHMA LIKE SYMPS. NICKEL CMPDS IN THE FUME CAN CAUSE A
METALLIC TASTE, NAUS, TIGHTNESS IN THE CHEST, FEVER & ALLERGIC
RXNS. FLUORIDE CAN CAUSE PUL M EDEMA BRONCHITIS. CHRONIC:OVEREXP TO
WELDING FUMES CAN LEAD TO SIDEROSIS (IRON DEPOSITS IN THE LUNG) &
AFFECT (ING 11)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST: CALL MD IMMEDIATELY . INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .
EYES: IMMEDIATELY FLUSH W/POTABLE WATERFOR A MINIMUM OF 15 MINUTES,
SEEK ASSISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER.
CALL MD .
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:(NONFLAMM) WELDING ARC & SPARKS CAN
IGNITE COMBUST & FLAMM. REFER TO AMERICAN NATIONAL STANDARD Z49.1
FOR FIRE PVNT DURING THE USE OF WELDING & ALLIED PROC.
Accidental Release
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS & THE PRECAUTIONARY LABEL ON THE PRODUCT.
Other Precautions:SEE AMERICAN NATIONAL STANDARD Z49.1, SAFETY IN
WELDING & CUTTING PUBLISHIED BY THE AMERICAN WELDING SOCIETY, P.O.
BOX 351040, MIAMI, FL 33135 & OSHA PUBLICATION 2206 (29CFR1910). US
GOVERNMENT PRINTI NG OFFICE, WASHINGTON, D.C.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC/BOTH, TO KEEP FUMES &
GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDERS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES(SUPDAT)
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
WEAR HEAD, HAND & BODY PROT WHICH HELP TO PVNT INJURY FROM (SUPDAT)
Work Hygienic Practices:TRAIN WELDER TO KEEP HEAD OUT OF FUMES, NOT TO
TOUCH LIVE ELEC PARTS & INSULATE (SUPDAT)
Supplemental Safety and Health
EXPLAN OF CARCIN:CARCIN, 1994:ANTIC TO BE CARCIN. EYE PROT:& FULL
LENGTH FACESHIELD W/FILTER LENS. AS A RULE OF THUMB, START W/SHADE
TOO DARK TO SEE WELD ZONE. THEN GO TO NEXT LIGHTER SHADE WHI CH
GIVES SUFF VIEW OF WELD ZONE. OTHER PROT EQUIP:RADIA, SPARKS, &
ELEC SHOCK. HYGIENE PRACT:HIMSELF FROM WORK & GROUND.
Chemical Properties
HCC:T6
Stability
Stability Indicator/Materials to Avoid:NO
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED FUME CONSTITUENTS
WOULD INCL:PRIMARILY FLUORIDES & COMPLEX OXIDES OF IRON, MANGANESE
& (ING 23)
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AN D LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.